What gutter problems can be repaired?
- Leak Detection & Sealing
- Re-Hanging Sagging Gutters
Most gutter failures come down to a handful of causes: dried-out sealant at seams and end caps, hangers that have loosened as fascia wood aged, sections that have lost their pitch so water pools instead of draining, and outlets that were never sized right. We reseal joints with a tripolymer sealant made for aluminum, replace spikes with screw-in hidden hangers, re-pitch sagging runs with a level, and add outlets or downspouts where a run is asked to carry more water than it can.
Downspouts and storm damage
- Downspout Repair & Replacement
- Storm & Ice Damage Fixes
Downspouts take the hardest hits: crushed by cars and mowers, separated at the elbows, or clogged solid at the bottom. We replace damaged sections, upgrade 2×3 leaders to 3×4 where they keep clogging, and add extensions or splash blocks so water lands well away from the foundation. After nor’easters and ice storms we straighten and re-hang gutters pulled loose by snow load, and we replace sections that have been bent beyond repair.
Repair or replace: how we decide
- Honest Assessments, No Unnecessary Upsells
- Fast Response & Follow-Up After Every Job
A gutter with one bad seam or a few loose hangers should be repaired. A sectional system with leaks at every joint, aluminum so thin it dents when touched, or rust-through on steel gutters is usually past saving, and repairing it piece by piece costs more over two years than replacing it once. We show you what we find, explain both options with prices, and let you choose. Nobody on our crew is paid on commission.
Common repairs and what they involve
- Leaking seams and end caps
- Old sealant is removed, the joint is cleaned and dried, and re-sealed with a flexible tripolymer sealant that bonds to aluminum and moves with temperature changes.
- Sagging or pulling away
- Failed spikes are replaced with screw-in hidden hangers every 24 inches; runs are re-pitched so water reaches the downspout instead of pooling.
- Overflow at corners
- Usually an undersized outlet or a missing downspout. We enlarge the outlet, add a 3×4 downspout, or install a splash guard on inside corners.
- Damaged sections
- Bent or crushed lengths are cut out and replaced with matching seamless aluminum in the same color, spliced with sealed slip joints.
- Downspouts and extensions
- Separated elbows are re-fastened, crushed leaders replaced, and extensions added so water discharges 4–6 feet from the foundation.
- Fascia and drip edge
- Soft fascia behind a leaking gutter is flagged and, when needed, replaced so new hangers have solid wood to bite into.
How a gutter repair visit works
- 1
Describe the problem
Call or send a photo of the overflow, drip or sag. Most repair visits are scheduled within the week; storm damage is prioritized.
- 2
On-site inspection
We walk the entire system, not just the spot you noticed, and check pitch, hangers, seams, outlets and downspouts.
- 3
Written price before work starts
You get a clear price for the repair and, if replacement is the smarter choice, that price too. You decide.
- 4
Repair, test and clean up
We complete the repair the same visit whenever possible, run water through the system to confirm the fix, and leave the site clean.
What determines the cost of a gutter repair?
Repair pricing depends on:
- The number of seams, hangers or sections that need attention
- Whether downspouts or fascia boards are involved
- Roof height and access: second-story and steep roofs take longer
- Storm damage that requires replacing whole runs
We quote every job in writing after a free on-site visit. Gutter pricing depends on measurements and roof conditions that can only be confirmed in person, so we don’t publish price lists. There is no obligation.
Gutter repair questions we hear most
Why does my gutter overflow when it isn’t clogged?
Usually because the run has lost its pitch, the outlet is too small for the roof area feeding it, or an inside corner concentrates water faster than the gutter can carry it. Each has a specific fix.
Can a leaking gutter seam be sealed?
Yes. Once the old sealant is stripped and the joint is clean and dry, a quality tripolymer sealant will hold for years. Seams that have opened up because the gutter is pulling apart need re-hanging first.
How quickly can you come out after a storm?
We prioritize storm and ice damage. Most emergency calls are seen within one to two business days, weather permitting.
Do you repair gutters you didn’t install?
Yes. We repair aluminum, galvanized and copper systems from any installer, as long as the material is sound enough to be worth repairing.
Is a repair covered by a warranty?
Yes. Our workmanship warranty covers the repair itself; the terms are stated on your written estimate.